dass Notaz weiterhin uns mit Pandora Zaxxon Updates verwöhnt.
hier ist der Link zum Super Zaxxon 1.76 Fullflash
http://openpandora.org/firmware/fullfla ... xon176.zip
Änderungen zur Super Zaxxon Vorgängerversion:
Quelle hier:Changelog (since SZ 1.75):
kernel: updated to latest stable 3.2.84 (includes dirtycow fix)
kernel: fixed off mode related display corruption (loss of gamma) when custom gamma setting is used
kernel: /sys/class/power_supply/twl4030_*/charge_current is now expressed in uA (Grond)
kernel: added end_of_charge_current to control end of charge (Grond)
kernel: reduced USB charge current to ~530mA, older value was too high for some hosts and would trigger host overcurrent protection
kernel: added mt7610u wifi driver
kernel: enabled options needed by Docker (see here for more info)
links: updated to 2.13
https://pyra-handheld.com/boards/thread ... -76.79384/
Falls ihr nach so langer Zeit mit der PAndora noch nicht wissen solltet wie man reflasht
viel SpaßUpgrade instructions using the Full-Flash-Image:
Download SuperZaxxon v1.76
Please note: Flashing the new firmware will put your unit back into a default state. All your settings and users will be lost. Of course, this does not apply to PNDs which save their stuff on the SD-Card.
To install it, simply extract the archive onto the root of your SD Card.
Insert the SD Card into the left slot. Keep R (shoulder) pressed while switching on your Pandora and select "Boot from SD1"
It will then flash the firmware onto the NAND. After it's finished, reboot your Pandora and patiently wait until the First Boot Wizard appears on the screen.
Please note: When reflashing from v1.72 or earlier, some SD cards might not be detected ("Boot from SD1" will not appear). You will need to find another SD card, usually older ones work.